Feed Mill Machinery

  Product overview The production line is a very popular  animal feed  machinery  adopts manual weighing and batching, and the designed total capacity of finished products is 5-7TPH for feed pellets finished products. The raw materials need to be pre-weighed and then fed from two different feeding ports into the production line. The raw materials to be crushed are feed from the granular feeding port to the crusher according to batches. The crusher adopts a screw conveyor for feeding. The powder that does not need to be crushing enters the production line from the powder feeding port after pre-weighing, is then mixed by the mixer, the mixed materials can directly enter the finished product warehouse as powder finished products, or enter the granulation section for granulation cooling processing, and finally, be weighed and packaged manually. The total power of the unit is about 171kw. Unit floor size: about 5× 8× 12m, 0.5T steam boiler is required. The whole...

  The main raw materials of feed are mainly divided into the following types: 1. Feed containing a large amount of starch These feeds are mainly composed of grains, seeds, and roots or tubers containing a large amount of starch. For example, all kinds of grains, potatoes, wheat, barley, beans, etc. These feeds mainly provide energy through polysaccharides and contain little protein. They are suitable for ruminants, poultry, and pigs, but feeds containing too much starch are not suitable for horses. After being processed by a  pellet feed making machine , their starch is converted into nutrients and absorbed by animals. 2. Oily feed These feeds are composed of oily seeds (rape, soybean, sunflower, peanut, cottonseed), etc. The energy of these feeds mainly comes from lipids, so their energy density is higher than that of feeds containing starch. The protein content of these feeds is also relatively low. Because these oils also have industrial uses, the popularity of such feed is...

In the process of pellet feed production, if the user does not operate the feed pellet machine correctly, it will undoubtedly affect the service life of the feed pellet machine. How can we better reduce the wear of vulnerable parts of the feed pellet machine? Let's share with you the wear cause analysis and maintenance methods of vulnerable parts of the feed pellet machine. 1. Raw material particle size Because the crushing fineness of raw materials determines the surface area of pellet feed composition, the finer the particle size is, the larger the surface area is, the faster the material absorbs water in steam, and it is relatively easy to condition and particle forming; If the grain is too coarse, the die wear increases, the energy consumption increases, and the productivity decreases.  The requirements of  poultry feed equipment  manufacturers are that the particle size of raw materials after crushing shall all pass through the 8-mesh screen, but the materi...