Feed Mill Machinery

In the process of feed production, three factors affect the quality: one is the quality of raw materials; the other is the feed formula; and the third is the production process, and these three influence each other. After controlling the quality of raw materials and feed formulations, how to improve the quality of feed by improving the production process has become an important means for many feed companies to improve product quality. 1. Feed moisture control   The issues that must be paid attention to in the feed production process are: ① How to improve the feed pellets quality; ② How to reduce dust; ③ How to improve pellet feed-making machine production efficiency and reduce processing energy consumption; ④ How to make full and effective use of steam, and cool enough to keep proper moisture in the feed. 2. Control of impurity removal of raw materials   A large number of impurities are mixed into feed ingredients. If they are not cleaned up in advance, it ...

Energy-saving is a point that every feed processing factory is very concerned about. In the daily production process, how to reduce energy consumption and increase production to a greater extent, Henan Herm Machinery recommends that you need to do the following. One, How does the power transmission system save energy consumption? Poultry feed equipment  all transmit power through transmission devices such as bearings, reducers, and transmission belts. Therefore, we must first ensure the normal operation and lubrication of the transmission devices to reduce the loss of power in the transmission process and achieve energy-saving effects. 1. Select the appropriate type of lubricant and the amount used to ensure that the feed equipment has a good working environment and state; 2. Keep the drive belt at a proper tension level, replace the worn drive belt, and use pulleys and other devices that match the drive belt; 3. Avoid the vibration of the transmission equipment caused by the ...

Product Overview The production line is a very popular  animal feed machinery   that adopts manual weighing and batching, and the designed total capacity of finished products is 5-7TPH for feed pellets finished products. The raw materials need to be pre-weighed and then fed from two different feeding ports into the production line. The raw materials to be crushed are fed from the granular feeding port to the crusher according to batches. The crusher adopts a screw conveyor for feeding. The powder that does not need to be crushed enters the production line from the powder feeding port after pre-weighing and is then mixed by the mixer, the mixed materials can directly enter the finished product warehouse as powder finished products, or enter the granulation section for granulation cooling processing, and finally, be weighed and packaged manually. The total power of the unit is about 171kw. Unit floor size: about 5× 8× 12m, 0.5T steam boiler is required. The whole unit ...

Chicken feed machine  is suitable for small and medium-sized agricultural farms, such as raising rabbits, chickens, ducks, geese, fish, pigs, cattle, sheep, water, and other farmers. Chicken feed-making machines can also produce sinking fish feed, as well as powder, pellets, crushed materials, lump materials, etc. 1. Raw material receiving and storage (cleaning) Impurities in the raw materials not only affect the growth of animals, but also easily cause blockage of pipelines and equipment, and even damage equipment (screens, ring molds, etc.). Screening, magnetic separation, and suction dust removal methods can be used. 2. Smash The purpose of crushing: increase the specific surface area of ​​the feed, improve the digestion and utilization of the feed by the animal; improve the quality of the subsequent processes such as ingredients, mixing, and pelleting, and improve the work efficiency of these processes. 3. Mixing process Ingredients are the process of feeding and...

2-3t/H Feed Pelletizer Introduction 2-3T/H  feed pelletizer  is a combination of crushers, pulse dust collectors, screw conveyors, mixers, pelletizers, bucket elevators, countercurrent cooling pellet dryers, vibrating screens, and other equipment with good performance.  The  poultry feed-making machine  integrates the functions of crushing, mixing, lifting, granulating, cooling, screening, etc., with automatic feeding, rapid feeding, and smooth discharging. It is a medium-sized feed unit with low investment and quick results. The Feature of Feed Pelletizer: 1. The feed pelletizer has a compact structure, beautiful appearance, convenient installation, operation and maintenance, and reliable work.   2. The feed pelletizer is equipped with ring molds with various apertures such as φ6, φ8, φ10, etc., users can choose according to different needs, and can customize ring dies with different apertures for users.   3. The feed pelletiz...