Feed Mill Machinery

Product Overview The production line is a very popular  animal feed machinery  that adopts manual weighing and batching, and the designed total capacity of finished products is 5-7TPH for feed pellets finished products. The raw materials need to be pre-weighed and then fed from two different feeding ports into the production line. The raw materials to be crushed are fed from the granular feeding port to the crusher according to batches. The crusher adopts a screw conveyor for feeding. The powder that does not need to be crushed enters the production line from the powder feeding port after pre-weighing and is then mixed by the mixer, the mixed materials can directly enter the finished product warehouse as powder finished products, or enter the granulation section for granulation cooling processing, and finally, be weighed and packaged manually. The total power of the unit is about 171kw. Unit floor size: about 5× 8× 12m, 0.5T steam boiler is required. The whole unit a...

Energy-saving is a point that every feed processing factory is very concerned about. In the daily production process, how to reduce energy consumption and increase production to a greater extent, Henan Herm Machinery recommends that you need to do the following. One, How does the power transmission system save energy consumption? Poultry feed equipment  all transmit power through transmission devices such as bearings, reducers, and transmission belts. Therefore, we must first ensure the normal operation and lubrication of the transmission devices to reduce the loss of power in the transmission process and achieve energy-saving effects. 1. Select the appropriate type of lubricant and the amount used to ensure that the feed equipment has a good working environment and state; 2. Keep the drive belt at a proper tension level, replace the worn drive belt, and use pulleys and other devices that match the drive belt; 3. Avoid the vibration of the transmission equipment caused by the ...